Thank you very much!

The product was added to the comparison. You can add more products or start the comparison.

LUKAS
 

THE BEAST BY LUKAS S 799 E2

  • 90-20-43
THE BEAST BY LUKAS is the new top model in the LUKAS cutter portfolio and stronger than any... more

luk20014_assets_webseite_230x380_01_beast

THE BEAST BY LUKAS is the new top model in the LUKAS cutter portfolio and stronger than any other hydraulic cutter!

While the previous top-of-the-range S 788 E2 has always offered truly outstanding cutting performance, our BEAST BY LUKAS takes it to the next level. With the TÜV-certified cutting performance according to EN 13204 or NFPA, the new S 799 E2 achieves the highest possible categories in each case: "All 9" according to NFPA and "5 x K" according to EN 1304. More is not possible! And also the cutting force in kN reaches the highest value of all LUKAS shears: 1,346 kN, i.e. almost 140 tons were calculated.

But even these high values only say a fraction of the unbeatable performance in practical use. After all, the best theoretical cutting force is of little use if it is not supported by an optimum shape of the shearing blades. The redesigned S 799 E2 knives do not just look as if they have been specially designed for the application. They also guarantee an outstanding cutting result in practice. The cutter automatically centres itself around the part to be cut in such a way that the maximum possible cutting force is always available. With an opening width of 204 mm, THE BEAST BY LUKAS also falls into the highest possible category according to EN 13204, i.e. class CC 200, when it comes to the criterion "blade geometry".

With our BEAST BY LUKAS - S 799 E2 you are equipped for all the challenges that new vehicle materials present in use.

 
Dimensions: 1010 x 276 x 281 mm
Battery: 5,0 Ah
EN-Classification: CC 200 K-26,2
EN cutting class: K
EN Cutting capacity: 1K-2K-3K-4K-5K
Weight: 25,3 kg
Blade opening: 204 mm
NFPA cutting classes: A9, B9, C9, D9, E9
Round steel up to: 45 mm
Cutting force up to: 1376 kN
Protection class: IP 54
Series: e2
Cuts the material in one go, no matter where the S 799 E 2 is placed New blade geometry: The... more
  • Cuts the material in one go, no matter where the S 799 E 2 is placed
  • New blade geometry: The cutter automatically centres itself around the part to be cut so that the maximum possible cutting force is always available
  • Stronger than any other hydraulic cutter: NFPA - All 9, EN - 5 x K
  • 204 mm opening width and thus the highest possible category according to EN 13204 (class CC 200)
  • cutting force: 1,376 kN, i.e. almost 140 tons
  • Ideally suited for all current and new vehicle materials
Technical Data of the product "THE BEAST BY LUKAS S 799 E2"
Dimensions: 1010 x 276 x 281 mm
Battery: 5,0 Ah
EN-Classification: CC 200 K-26,2
EN cutting class: K
EN Cutting capacity: 1K-2K-3K-4K-5K
Weight: 25,3 kg
Blade opening: 204 mm
NFPA cutting classes: A9, B9, C9, D9, E9
Round steel up to: 45 mm
Cutting force up to: 1376 kN
Protection class: IP 54
Series: e2
Dealer Network
Viewed